H User Interface Types; H Snmp Management Capabilities; Management Information Base (Mib) Support - Paradyne Hotwire 8774 User Manual

About the Hotwire 8774 Termination Unit
User Interface Types
SNMP Management Capabilities

Management Information Base (MIB) Support

Router
1-4
There are two types of user interfaces to the 8774 Termination Unit:
H
Menu-driven async terminal interface screens. See Chapter 2,
Asynchronous Terminal Interface
H
Front panel LED status indicators. See Chapter 4,
Termination Unit .
The termination unit supports SNMP Version 1, and can be managed by any
industry-standard SNMP manager and accessed using SNMP by external SNMP
managers.
For a detailed description of supported MIBs, visit Paradyne's web site at
http://www.paradyne.com. The following MIBs are supported:
H
MIB II (RFC 1213 and RFC 1573) – Defines the general objects for use with
a network management protocol in TCP/IP internets and provides general
information about the unit. MIB II is backward-compatible with MIB I.
H
DS1/E1 MIB (RFC 1406) – Reports the performance status of the DSX-1
interface and supports the features found on the DSX-1 Performance
Statistics screen.
H
RS-232-Like MIB (RFC 1659) – Defines objects for managing RS-232-type
interfaces (e.g., V.35, RS-422, RS-423, etc.) and supports the synchronous
data port on the DSU.
H
Enterprise MIB – Supports configuration, status, statistics, and tests.
DSL
DSX
EOC
7974
December 1998
.
Monitoring the 8774
Network
8774
3
AC
T5A 2
250V
48V RTN
A B A B 1
DC FUSES
T4A, MIN. 48V FAN DC PWR
AC 5
4 6 .
INPUT 3 .
2 . . ALM A B
1
48VDC CLASS 2 OR A B STACK IN OUT SERIAL MCC 1 2 3
LIMITED PWR SOURCE POSITION
8600 Ethernet
DSLAM Interface
Ethernet
LAN
Using the
Operation, Maintenance
and Provisioning Center
SNMP NMS
Data
Voice
98-16114
8774-A2-GB20-10