About The Hotwire 8774 Termination Unit; H M/Sdsl Overview; H Hotwire 8774 Termination Unit Features - Paradyne Hotwire 8774 User Manual

About the Hotwire 8774
Termination Unit
M/SDSL Overview
Hotwire 8774 Termination Unit Features
8774-A2-GB20-10
Hotwiret Multirate/Symmetrical Digital Subscriber Line (M/SDSL) products can
transport at full or fractional payload rates over a 2-wire, full-duplex circuit over
varying distances. Examples include support for router, multiplexer and PBX
connections on 24 gauge (.5 mm) cable at greater than 14,000 feet (4.6 km)
delivered at 1.544 Mbps.
Hotwire M/SDSL units are equipped with an automatic configuration capability
that reduces the M/SDSL installation process to a simple plug and play mode.
The 4-port Hotwire 8774 M/SDSL Termination Unit is a circuit board mounted in a
Hotwire 8600 or 8800 Digital Subscriber Line Access Multiplexer (DSLAM) and
used to transport signals at high speeds over a twisted-pair connection.
The 8774 Termination Unit offers these standard features:
H
Embedded Operations Channel (EOC). Provides remote management via
SNMP or Telnet session capability over the M/SDSL network.
H
SNMP ( Simple Network Management Protocol ) Management. Provides
network management via an industry-standard SNMP management system.
H
Asynchronous Terminal Interface (ATI). Provides a menu-driven
VT100-compatible terminal interface for configuring and managing the
8774 Termination Unit locally or remotely by Telnet session.
H
Local Management. Provides local management using the Management
Communications Card (MCC) with a:
— Terminal or PC via the Management Serial port of the DSLAM
— Network Management System (NMS) via the Management MCC port of
the DSLAM
— NMS connection through the 10BaseT port
December 1998
1
1-1