H Saving Configuration Options - Paradyne Hotwire 8774 User Manual

Initial Startup and Configuration
Saving Configuration Options
"
Î
Î
3-8
When changes are made to the configuration options through the Configuration
Edit/Display branch, the changes must be saved to take effect. Use the Save key
or Save Configuration screen.
Procedure
To save configuration options changes:
1. Press Ctrl-a to switch to the screen function key area below the dotted line.
2. Select Save and press Enter.
NOTE:
When Exit is selected before Save, or Save has been selected from any
menu in the Configuration/Edit branch, a Save Configuration screen appears
requiring a Yes or No response.
main/config/saveprompt
Slot: 4
An answer of "yes" will cause the system
to reset as if it had been powered off and on!
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Command Complete
If the Telnet Session configuration option is changed, a message displays on the
Save Configuration screen warning that an answer of Yes will cause the Telnet
session to disconnect. Do not answer Yes unless you are prepared to disconnect.
If the SDSL Mode configuration option is changed, the Save Configuration screen
bears the warning that an answer of Yes will cause the system to reset. Do not
answer Yes unless you are prepared to reset.
If you select . . . Then . . .
Yes The configuration is saved.
No The Main Menu appears and changes are not saved.
December 1998
SAVE CONFIGURATION
Save Changes? No
WARNING:
Hotwire
Model: 8774
Î Î
Î Î
MainMenu Exit
8774-A2-GB20-10