Paradyne Hotwire 8774 User Manual page 109

N
navigating the screens, 2-8
Net Margin Threshold, status message, 4-4
network, tests, 5-2
Network DSL Failed, self-test result, 4-5
Network Interface Options, A-2
Circuit Identifier, A-3
Excessive Error Rate Threshold, A-2
Margin Threshold, A-2
Peer IP Address, A-3
NMS
SNMP access, 7-5
SNMP connectivity, 8-1
no test active status message, 4-6
O
OK, LED, 4-13
OOF (Out Of Frame), status message, 4-3
options, configuration tables, A-1
overview
8775 Termination Unit, 1-1
user's guide, v
P
Passed, self-test result, 4-5
Peer IP Address, A-3
performance statistics, 4-8
DSX-1, 4-10
physical environment requirements, D-1
pin assignments, C-1
Port Status, A-4
power requirements, D-1
Primary Clock Source, A-5
R
related documents, vi
remote send line loopback, 5-6
repeater loopback (RLB), 5-4
reset, ATI, 3-9
restore access to ATI, 3-9
8774-A2-GB20-10
S
Save Configuration screen, 3-8
saving option changes, 3-8
screen, function keys, 2-9
screens, for user interface, 2-1– 2-6
SDSL Mode, A-7
security, 7-1
self-test results, 4-5
Send and Monitor 511, 5-7
Send Remote Line Loopback, 5-6
size of card, D-1
SNMP
system entries, 3-2
trap options, 6-2
traps, B-1
SNMP Management Configuration, A-14
SNMP management
general, 1-4
limiting access, 7-4
SNMP NMS Security Options, A-14, A-16
SNMP Trap Options, A-11
Enterprise Specific Traps, A-12
Link Trap Interfaces, A-13
Link Traps, A-13
NMS n Destination, A-12
NMS n IP Address, A-12, A-17
Number of Trap Managers, A-11
SNMP Traps, A-11
SNMP Traps, enable/disable, A-11
start-up, ATI, 2-1
status, test messages, 4-6
subnet, IP addresses, 8-1
system
device name fields, 3-2
LEDs, 4-13
System Options
DSL Mode, A-7
Test Duration, A-7
Test Timeout, A-7
December 1998
Index
IN-3