Self-Test Results - Paradyne Hotwire 8774 User Manual

Self-Test Results

8774-A2-GB20-10
The results of the last power-up or reset self-test appear in the middle column of
the System and Test Status screen.
Table 4-2. Self-Test Results Messages
Message What Message Indicates
CPU Failed The CPU failed internal testing.
DeviceFailed One or more of the 8774 Termination
Unit's integrated circuit chips has
failed device-level testing.
Net DSL The 8774 Termination Unit failed to
Failed, Pt n loop data on the network DSL circuit
of Port n .
DSX-1 The 8774 Termination Unit failed to
Failed, Pt n internally loop data on the DSX-1
Port n .
Memory The 8774 Termination Unit failed
Failed memory verification.
Failure An internal failure occurred.
xxxxxxxx (xxxxxxxx represents an 8-digit
hexadecimal failure code for use by
service personnel.)
Passed No errors were detected.
December 1998
Monitoring the 8774 Termination Unit
What To Do
1. Reset the unit and try again.
2. Call your service
representative for assistance.
1. Reset the unit and try again.
2. Call your service
representative for assistance.
1. Reset the unit and try again.
2. Call your service
representative for assistance.
1. Reset the unit and try again.
2. Call your service
representative for assistance.
Record the failure code and
contact your service
representative.
N/A
4-5