Reset Mode - Siemens SITRANS F M MAG 5000 Operating Instructions Manual

Functions

8.4 Reset mode

8.4 Reset mode
The reset mode is used for resetting totalizers/counters or for restoring MAG 5000/6000 to
its factory settings.
Resetting
1. Press top up key
2. Enter password.
3. Use forward key
4. Press lock/unlock key
5. Press forward key
6. Press lock/unlock key
If restoring of factory settings is required:
1. Press lock/unlock key
See also reset menu diagram (Page 85).
Zero point adjustment (MAG 6000 SV only)
Auto adjustment
Before auto zero point adjustment is carried out ensure that valves to and from flowmeter are
completely closed and that flow velocity in sensor is zero.
1. Press top up key
2. Enter password.
3. Use forward key
4. Press lock/unlock key
5. Press forward key
6. Press lock/unlock key
7. Use change key
8. Press forward key
9. Press lock/unlock key
Manual adjustment.
1. Press top up key
2. Enter password.
3. Use forward key
4. Press lock/unlock key
5. Press forward key
6. Press lock/unlock key
7. Use change key
52
for 2 sec.
or backward key
to reach totalizer/counter to be reset or default setting menu.
for 2 sec.
or backward key
to reach zero adjust menu.
to select "auto".
to view actual offset (lower line in display). Value will be zero after
adjustment has been performed.
for 2 sec.
or backward key
to reach zero adjust menu.
to select "manual".
to reach reset mode menu.
to enter reset menu.
to start resetting.
again to confirm destruction of customized settings.
to reach reset mode menu.
to enter reset menu.
to enter the menu.
to start adjustment.
to reach reset mode menu.
to enter reset menu.
to enter the menu.
Operating Instructions, 01/2010, SFIDK.PS.026.G1.02
SITRANS F M MAG 5000/6000