Changing Operator Menu Setup - Siemens SITRANS F M MAG 5000 Operating Instructions Manual

Commissioning

6.6 Changing operator menu setup

6.6 Changing operator menu setup
In the operator menu the menus required for daily operation of the flowmeter are shown. It is
possible to hide and change some of the menus in the operator menu. This is done in the
operator menu setup menu, see operator menu setup diagram (Page 78).
Customizing menus in operator menu
To customize the menus in the operator menu perform the following steps:
1. Press top up key
2. Enter password.
3. Use forward key
Changing text in line 1
1. Press lock/unlock key
2. Use change key
3. Press lock/unlock key
Note
If "Text" is selected in line 2, this line functions as a heading for the value shown in line 3.
Otherwise it shows the actual value of the reading selected.
Enabling two readings
1. Use forward key
2. Press lock/unlock key
3. Use select key
4. Use change key
5. Press lock/unlock key
6. Use select key
7. Use change key
8. Press lock/unlock key
9. Repeat steps 1-8 for each requested menu.
Showing/hiding menus in operator menu
1. Use forward key
2. Press lock/unlock key
3. Use select key
4. Press change key
5. Press lock/unlock key
42
for 2 sec.
or backward key to reach operator menu.
to unlock setting.
to select desired text.
to confirm selected text.
to reach requested menu.
to unlock setting.
to move cursor to upper line.
to select requested reading.
to confirm selection.
to move cursor to line 3.
to select desired setting.
to confirm new setting.
to reach requested menu.
to unlock setting.
to move cursor to /
to select visible ( ) or hidden (
to confirm new setting.
symbol.
).
SITRANS F M MAG 5000/6000
Operating Instructions, 01/2010, SFIDK.PS.026.G1.02