8. Mount connection plate in terminal box.
9. Tighten cable glands to obtain optimum sealing.
10. Mount transmitter on terminal box.
11. Transmitter is ready to be powered up.
SITRANS F M MAG 5000/6000
Operating Instructions, 01/2010, SFIDK.PS.026.G1.02
Note
Check that your connection board lines up with SENSORPROM
SENSORPROM
unit to the other side of terminal box.
®
SENSORPROM
memory unit connections will be established automatically when
®
connection plate is mounted in terminal box.
CAUTION
Exposing transmitter to direct sunlight may increase operating temperature above its
specified limit, and decrease display visibility.
A sunshield is available as accessory.
Installing/Mounting
4.2 MAG 5000/6000 compact
unit, if not, move
®
21