External Input; Sensor Characteristics; Reset Mode - Siemens SITRANS F M MAG 5000 Manual

7.2
7.3
7.4
www.eltra-trade.com

External input

By applying 11 ... 30 V DC to terminals 77 and 78, it is possible to perform:
● Batch control (start, stop, hold/continue)
● Reset totalizer
● Force/freeze output
● Q 2 (night)
max
See external input menu diagram.
Note
Batch settings
Only MAG 6000.
Not available in MAG 5000, MAG 5000 CT and MAG 6000 CT.
Note
Manual cleaning
If the digital input is used for manual cleaning, the relay output also automatically changes to
"cleaning".

Sensor characteristics

The sensor characteristics menu shows:
● If a SENSORPROM
● Suppress error P 40 (SENSORPROM
● Sensor size.
● Calibration factor.
● Correction factor.
● Excitation.
See also sensor characteristics menu diagram.

Reset mode

The reset mode is used for resetting totalizers/counters or for restoring MAG 5000/6000 to
its factory settings.
is installed or not.
®
not installed)
®
info@eltra-trade.com
Functions
7.2 External input
49
+421 552 601 099