IEM Mobil-O-Graph PWA Operating Manual page 96
Long-term blood pressure measuring device
Hide thumbs
Also See for Mobil-O-Graph PWA:
- Operating manual (322 pages) ,
- Operating instructions manual (92 pages) ,
- Instructions for use manual (462 pages)
Table of Contents
Advertisement
Available languages
Available languages
Product description
It is important here that the patient:
▪
is sitting/standing/lying comfortably
▪
does not cross their legs
▪
places their feet flat on the floor (when sitting or standing)
▪
supports their back and arms (when sitting or lying)
▪
keeps quiet and does not speak
Note
▪
The patient should relax as much as possible during the measurement and must not speak, unless
this is to express discomfort.
▪
There must be 5 minutes' rest before the first reading is recorded.
▪
During a 24-hour measurement, the patient should adopt one of the three positions shown in Table 1
during a blood pressure measurement if possible.
▪
The measurements may be influenced by the measuring location, the position of the patient, the
exertion or the physiological condition of the person to be measured.
94
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Mobil-O-Graph PWA and is the answer not in the manual?
Questions and answers
Que veux dire code 6 et code 2
Code 6 means that there are no unsent blood pressure values in the measurement memory of the Mobil-O-Graph®.
Code 2 indicates that the Bluetooth interface of the Mobil-O-Graph® could not be configured properly, possibly due to a communication problem between the device and the Bluetooth module.
This answer is automatically generated
Calibración