IEM Mobil-O-Graph PWA Operating Manual page 122
Long-term blood pressure measuring device
Hide thumbs
Also See for Mobil-O-Graph PWA:
- Operating manual (322 pages) ,
- Operating instructions manual (92 pages) ,
- Instructions for use manual (462 pages)
Table of Contents
Advertisement
Available languages
Available languages
Appendix
WARNING
After an automatic measurement, allow at least 3 minutes to elapse to avoid prolonged
impairment of blood circulation before actively starting a measurement.
Audible signals
The audible signals generated by the device consist of individual or multiple tone burst sequences. The following
tone burst sequences are emitted:
Tone burst
1 tone burst
3 tone bursts
Continuous tone bursts
120
Heard when
▪
Switching on and off
▪
Starting and ending measurement (except during the night-time
interval)
▪
Removing the interface cable, ending IR communications,
establishing and ending Bluetooth communications
▪
Measurement errors
▪
System error
▪
Serious system error (e.g. the cuff pressure is greater than 15 mmHg
for more than 10 seconds outside the measurement)
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Mobil-O-Graph PWA and is the answer not in the manual?
Questions and answers
Que veux dire code 6 et code 2
Code 6 means that there are no unsent blood pressure values in the measurement memory of the Mobil-O-Graph®.
Code 2 indicates that the Bluetooth interface of the Mobil-O-Graph® could not be configured properly, possibly due to a communication problem between the device and the Bluetooth module.
This answer is automatically generated
Calibración