IEM Mobil-O-Graph PWA Operating Manual page 123
Long-term blood pressure measuring device
Hide thumbs
Also See for Mobil-O-Graph PWA:
- Operating manual (322 pages) ,
- Operating instructions manual (92 pages) ,
- Instructions for use manual (462 pages)
Table of Contents
Advertisement
Available languages
Available languages
Troubleshooting
In the event of measurement or system errors, an error code will appear on the display of the Mobil-O-Graph
a few seconds. The following support instructions will help you understand how to deal with each error code:
Error code
ERR 1
ERR 2
ERR 3
ERR 5
ERR 6
ERR 7
ERR 8
ERR 9
ERR 10
Measures
Keep your arm still during measurement. If the error occurs repeatedly, put the arm
cuff on again.
Keep your arm still during measurement. If the error occurs repeatedly, check the
positioning of the arm cuff and check that the cuff tube is firmly connected to the
®
Mobil-O-Graph
.
Keep your arm still during measurement. If this error persists, please contact your
doctor.
The batteries of the Mobil-O-Graph
Check whether the cuff tube is kinked. If the error persists, please contact your
doctor.
Measurement storage is full. Please contact your doctor.
The measurement was terminated by pressing a button. Repeat the measurement.
Press the START button.
Please contact your doctor.
If the error persists, please contact your doctor.
®
are empty. Please contact your doctor.
Appendix
®
for
EN
121
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Mobil-O-Graph PWA and is the answer not in the manual?
Questions and answers
Que veux dire code 6 et code 2
Code 6 means that there are no unsent blood pressure values in the measurement memory of the Mobil-O-Graph®.
Code 2 indicates that the Bluetooth interface of the Mobil-O-Graph® could not be configured properly, possibly due to a communication problem between the device and the Bluetooth module.
This answer is automatically generated
Calibración