Power Packs/Batteries; Operation With Power Packs; Operating With Alkaline Batteries - IEM Mobil-O-Graph PWA Operating Manual

Power packs/batteries

6 Power packs/batteries

6.1 Operation with power packs

IEM supplies high-quality "ready to use" NiMH power packs with at least 1500 mAh which have very low self-
discharge. We recommend that you only use these power packs!
Tips:
▪
Fully charge the power packs before using them for the first time.
▪
Please note that NiMH power packs only reach their full charge capacity after the 4th charging cycle.
▪
Recharge power packs again if they have been lying around unused for a long time.
▪
Do not use power packs that have been stored above 45°C or below 0°C.
▪
Avoid total discharge in order to protect your power packs.
▪
If the operating time of the power packs drops significantly, replace all power packs at the same time.
Never use old used power packs together with new unused power packs!
Note
Only use the power packs supplied by us with the charger.
ATTENTION
Never charge non-rechargeable batteries. These can leak or explode and cause damage to your health.
For further information, please refer to the operating manual for the charger.

6.2 Operating with ALKALINE batteries

®
The Mobil-O-Graph can also be operated with alkaline manganese batteries. These batteries are non-
rechargeable and therefore must not be placed into the charger.
110