IEM Mobil-O-Graph PWA Operating Manual page 111
Long-term blood pressure measuring device
Hide thumbs
Also See for Mobil-O-Graph PWA:
- Operating manual (322 pages) ,
- Operating instructions manual (92 pages) ,
- Instructions for use manual (462 pages)
Table of Contents
Advertisement
Available languages
Available languages
Error indication
Code 5
The Bluetooth interface of the Mobil-O-
®
Graph
could not connect to the Bluetooth
dongle on the computer.
Code 6
The measurement value memory of the
Mobil-O-Graph
pressure values that have not yet been
sent.
Code 7
The Mobil-O-Graph
mobile phone or GSM modem which is
technically incapable of sending readings,
is outside the network range or is not
configured correctly.
Possible cause
®
does contain any blood
®
is connected to a
Remedy
Try it again.
If the error persists, send the device to your
specialist supplier or directly to IEM GmbH
for checking.
After taking further measurements, these
are sent.
Try it again.
If the error persists, please contact your
specialist supplier or IEM GmbH.
Troubleshooting
EN
109
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Mobil-O-Graph PWA and is the answer not in the manual?
Questions and answers
Que veux dire code 6 et code 2
Code 6 means that there are no unsent blood pressure values in the measurement memory of the Mobil-O-Graph®.
Code 2 indicates that the Bluetooth interface of the Mobil-O-Graph® could not be configured properly, possibly due to a communication problem between the device and the Bluetooth module.
This answer is automatically generated
Calibración