For STS module illustration, please refer to Figure 5-33.
5.7.1 STS Module Installation
The hot swappable STS module has been installed inside the UPS in the Delta factory
before shipment. If the STS module is removed for some reasons and you want to re-install
it, please follow the steps below:
NOTE:
1. Only qualified service personnel can perform the following STS module
2. The STS module is heavy (> 25 kg). At least two people are required for
1
Modulon DPH Series
LED Indicator
Handle
Switch
(Figure 5-33: STS Module)
installation procedures.
handling.
Handle
5-34
).