Parallel Units - Delta Modulon DPH series User Manual

Parallel Units

Single Unit
Pre Start-up Warnings for Single Unit
1. Make sure that all the breakers, including every external battery cabinet's breaker
(Q5), are turned to the OFF position.
is < 3V.
Modulon DPH Series
NOTE:
1. All unit No., UPS status, date, time, warning No., event No., load (%), battery
remaining time, user login, administrator login, etc. shown in the LCD diagrams
presented in 6. UPS Operation are for reference only. Actual readings depend
on the operation of the UPS.
2. In this user manual, the meaning of Q1, Q2, Q3, Q4 and Q5 represents the
following.
Code
Q1
Q2
Q3
Q4
Q5
3. Before operation, ensure that installation and wiring have been completely done
according to 5. Installation and Wiring, and relevant instructions have been
followed.
4. Before operation, please refer to 2.8 Tri-color LED Indicator & Buzzer and 7.
LCD Display & Settings.
5. (1) The setting of the
ON/ OFF Button (
(2) If you want to change the access setting for the ON/ OFF Button (
please go to
SETUP
For relevant information, please refer to 7.10.7 General Setting.
Input Breaker
Bypass Breaker
Manual Bypass Breaker
Output Breaker
External Battery Cabinet's Breaker
) presented in this user manual.
General Setting User
6-2
Meaning
is set as 'Any User' for all the
On/ OFF Button Access.
),
)