Setup Maintenance Log In User; Power Off; Transfer To Bypass Without Protection; Yes No - Delta Modulon DPH series User Manual

UPS-1.1 MEASUREMENT
Power Flow
3
After selection of 'YES', the UPS will shut down the inverter and terminate each power
module's output. As there is no bypass output in Frequency Conversion mode, all
output will be terminated right after the inverter is shut down. Now, each power module
keeps charging the batteries, the tri-color LED indicator illuminates yellow and the
following screen appears (Figure 6-59). For the tri-color LED indicator location, please
refer to Figure 2-11.
UPS-1.1 MEASUREMENT
Power Flow
POWER FLOW
Maintenance
Power Flow
Bypass
Bypass
Summary
Mains
System Status
90 %
5 mins
EMS
4
Switch OFF the Output Breaker (Q4) and log in as an Administrator. For the Admini-
strator password, please contact service personnel. After login, ensure that you are in
the Administrator login status (see Figure 6-60).
SETUP MAINTENANCE

POWER OFF ?

Transfer to Bypass without Protection!

Yes
(Figure 6-58: Power off Reminder Screen)
SETUP MAINTENANCE
(Figure 6-59: Standby Mode Screen)
6-41
LOG IN EVENT LOG
User
No
LOG IN EVENT LOG
User
Load
6 UPS Operation
10:15
May 25,2018
Standy
10:15
May 25,2018

Standby

0 %