Chapter 1 : Important Safety Warnings; Transportation; Preparation; Installation - Delta INX Series User Manual

Chapter 1 : Important Safety Warnings

Please comply with all warnings and operating instructions in this manual strictly.
Save this manual properly and read carefully the following instructions before
installing the unit. Do not operate this unit before reading through all safety
information and operating instructions carefully.

1.1 Transportation

Please transport the UPS system only in the original package to protect against
z
shock and impact.

1.2 Preparation

Condensation may occur if the UPS system is moved directly from cold to warm
z
environment. The UPS system must be absolutely dry before being installed.
Please allow at least two hours for the UPS system to acclimate the environ-
ment.
Do not install the UPS system near water or in moist environments.
z
Do not install the UPS system where it would be exposed to direct sunlight or
z
near heater.
Do not block ventilation holes in the UPS housing.
z

1.3 Installation

Do not connect appliances or devices which would overload the UPS system (e.g.
z
laser printers) to the UPS output sockets.
It is not recommended to connect the UPS with following type of loads.
z
For the load suitability please contact Delta customer service before purchasing.
1. Regenerative loads (e.g. CNC machine and lifts)
2. Asymmetrical loads (e.g. fans with half-bridge drivers and laser printers)
Place cables in such a way that no one can step on or trip over them.
z
Do not connect domestic appliances such as hair dryers to the UPS output sockets.
z
The UPS can be operated by any individuals with no previous experience.
z
Connect the UPS system only to an earthed shockproof outlet which must be
z
easily accessible and close to the UPS system.
Amplon INX Series
1