Chapter 1 : Important Safety Warnings; Transportation; Preparation; Installation - Delta Amplon Series User Manual

Chapter 1 : Important Safety Warnings

Please comply with all warnings and operating instructions in this manual
strictly. Save this manual properly and read carefully the following instructions
before installing the unit. Do not operate this unit before reading through all
safety information and operating instructions carefully.
1.1

Transportation

Please transport the UPS system only in the original package to protect
z
against shock and impact.

1.2 Preparation

Install the UPS in a well-ventilated indoor area, away from excess moisture,
z
heat, dust, flammable gas or explosives. To avoid fire accidents and elec-
tric shock, the indoor area must be free of conductive contaminants. For
the temperature and humidity specifications, please refer to Appendix 1:
Technical Specifications .
Do not block ventilation holes in the UPS housing.
z

1.3 Installation

Do not connect appliances or devices which would overload the UPS sys-
z
tem (e.g. laser printers) to the UPS output sockets.
It is not recommended to connect the UPS with following type of loads. For
z
the load suitability please contact Delta customer service before purchas-
ing.
1. Regenerative loads (e.g. CNC machine and lifts)
2. Asymmetrical loads (e.g. fans with half-bridge drivers and laser printers)
Place cables in such a way that no one can step on or trip over them.
z
Do not connect domestic appliances such as hair dryers to the UPS output
z
sockets.
The UPS can be operated by any individuals with no previous experience.
z
Connect the UPS system only to an earthed shockproof outlet which must
z
be easily accessible and close to the UPS system.
Please use only VDE-tested, CE-marked mains cable (e.g. the mains cable
z
of your computer) to connect the UPS system to the building wiring outlet
(shockproof outlet).
Please use only VDE-tested, CE-marked power cables to connect the loads
z
to the UPS system.
Amplon N Gen3 Series
1