Table of Contents
Advertisement
Incoming call
Incoming call in idle mode
Picking up a call
Refuse call
In the case of an incoming call, you normally hear the ringer tone.
If you are defining settings on the telephone during this, the pro-
cess is hold. After the telephone conversation you will be returned
to the point in the menu structure you were in before the call.
However, if you are using the menus "Administration" or "Diagno-
sis", you will not be interrupted, and the person calling will receive
a busy signal.
The HiNet LP5100 rings giving the set call signal.
Xxxxxxxxxxxxxxxxx
Pickup call?
If the number of the caller is transmitted, it will appear in the dis-
play. Otherwise the display will read:
Call no. not known
Pickup call?
You can now lift off the handset and talk with the person calling.
You can refuse an incoming call. If the number of the caller is
transmitted, it will be stored in the Missed Calls list so that you will
be able to call that person back at a later date.
08972261485
Pickup call?
08972261485
Refuse call?
13:15
Page forward with
The person calling will receive the message "Rejected".
>
Choose "Refuse call"
Confirm your choice
>
and
return to the basic
20.06.98
menu
>
Operation
22
Advertisement
Table of Contents
