Line Key Status Indication; Direct Station Select Key Status Indication - Siemens optiPoint 410 User Manual

Appendix

Line Key Status Indication

LED Line status
OFF Idle
BLINKING Call waiting mode.
RAPIDLY
FLICKERING Held.
BLINKING Idle (forwarded)
SLOWLY
BLINKS Idle (forwarded)
SLOWLY
ON Busy (local)
Busy (remote station)
(4)
FLICKERING All
WEAKLY
(1) In the case of a line for which a call is waiting, call waiting mode is maintained so that infor-
(2) A call may already be connected to the line for which a new call is waiting. This is referred
(3) The LED indicator on the prime line key indicates immediate forwarding instead of an idle
(4) Only if activated by administrator.
(5) An active call is connected to the multiline telephone. A call is connected to the other tele-

Direct Station Select key Status Indication

LED Line status
OFF Idle
ON Busy
BLINKING Incoming call
198
(5)
mation on the waiting call remains displayed.
to as "Call Waiting". The connection can be active or held
line.
phone.
Description
No connected calls.
A new incoming call/possible callback is wait-
(1)or (2)
ing.
A call held in a queue that can be answered by
the multiline telephone.
The line is forwarded immediately (prime line
(3)
only)
A secondary line is forwarded immediately (Hi-
Path 8000 forwarding)
The line is seized by a connection to the multi-
line telephone.
The line is seized by a connection to another
multiline telephone.
The line appears on the display, i. e. it is busy.
Description
The line assigned is not used.
The main line of the target telephone is busy.
An incoming call is waiting on the main line of
the target telephone.
(4)