Configuring Repdial/Direct Station Selection Keys - Siemens OpenStage 40 User Manual

Programming sensor keys
Step by Step
Assign telephony function
Destinations? g
Repdial?
Direct Station Select?
Enter new number?
Completed?
82
Configuring repdial/direct station
selection keys
Your telephone can be configured so that direct
station selection keys cannot be set up, thus fa-
cilitating data and personal security. Contact your
service personnel should you have questions.
Direct station selection keys can be assigned an internal
number from the HiPath 4000 network.
A typical application of direct station selection keys is
the executive-secretary configuration
You can program repdial keys with external phone num-
bers on two levels. To program the second level, you
must configure a "Shift" key
See also
Prerequisite: You have programmed a sensor key with
the function "Repdial" or "Direct station select"
page 81.
S
Press and hold the required sensor key.
Select and confirm the option shown.
or
N
Open the Program/Service menu
Confirm the option shown.
Select and confirm the option shown.
or
Select and confirm the option shown.
R
Press the configured repdial key,
or
DSS
Press the configured direct station select key.
Defining the phone number
j
Enter the number
Confirm the option shown.
Confirm the option shown. Your entry is saved.
page 81.
page 21.
page 120.
page 30.