Configuring Repdial Keys; Configuring Via A Sensor Key - Siemens HiPath 500 Operating Instructions Manual

Programming sensor keys
Step by Step
Assign phone number
Save & Exit
Save
84

Configuring repdial keys

You can also program internal and external station num-
bers on the second level. The LED function is not avail-
able for internal station numbers on the second level.
To program the second level, you must program a "Shift"
key
See also
You can program repdial keys in two ways:
•

"Configuring via a sensor key"

• "Configuring using the Program/Service menu"
Configuring via a sensor key
R
if nec.
Press the Shift key. The key LED lights up.
S
Press and hold the required sensor key.
Confirm.
The "Programming speed dial destination" page opens.
d
Select the "Number" entry.
Confirm.
j
Enter the station number.
d
Select the "Label" entry.
Confirm.
j
Enter the required key label text
b
Select the "Options" entry.
Select and confirm the option shown.
or
h
Press the key shown.
Confirm.
page 79.
page 19.
page 85
page 84
page 23.