Transition Networks SM24DPB Install Manuals page 4

Transition Networks
CAUTION: Circuit devices are sensitive to static electricity, which can damage their delicate
electronics. Dry weather conditions or walking across a carpeted floor may cause you to acquire a
static electrical charge.
To protect your device, always:
• Touch the metal chassis of your computer to ground the static electrical charge before you pick up the circuit
device.
• Pick up the device by holding it on the left and right edges only.
• If you need using outdoor device connect to this device with cable then you need to addition an arrester on
the cable between outdoor device and this device.
NOTE: The switch is indoor device; if it will be used in outdoor environment or connects with some outdoor device,
then it must use a lightning arrester to protect the switch.
WARNING:

Self‐demolition on Product is strictly prohibited. Damage caused by self‐demolition will be charged for repairing fees.

Before installation, make sure input power supply and product specifications are compatible to each other.

To reduce the risk of electric shock. Disconnect all AC or DC power cord and RPS cables to completely remove power
from the unit.

Before importing / exporting configuration please make sure the firmware version is always the same.
After firmware upgrade, the switch will move the configuration automatically to the latest firmware version.
33681 Rev. B
Addition of an arrester between outdoor device and this switch
https://www.transition.com
SM24DPB Install Guide
Page 4 of 24