Testing The Valves And The Valve-Actuator Combination - Festo CPV-SC Series Manual

4. Commissioning
4.3

Testing the valves and the valve-actuator combination

4-8
Note
Prior to commissioning the CPV-SC valve terminal, observe
the specifications on the medium,
control of the solenoid coils (pilot air supply).
Proceed as follows when commissioning the CPV-SC valve
terminal:
Commissioning variants
Preliminary check of the
pneumatic tubing
Complete commissioning of the
complete system
Tab. 4/4: Commissioning variants
Commissioning the pneumatic components by means of the
manual override is described below.
Installation, pilot
Activity
Checking the valve-actuator
combination by means of the
manual override
Installing and connecting the
complete system. Program
control by PLC/industrial PC
Festo P.BE-CPVSC-EN en 1206f