Connecting The Pneumatic Tubing - Festo CPV-SC Series Manual

3. Installation

3.3.4 Connecting the pneumatic tubing

3-14
Note
Connect the work lines as follows, depending on the tool
•
you are using:
– screw connector with hexagon socket head:
Any sequence is possible
– screw connector with external hexagon socket head:
The connection must be made from left to right
(space for wrench)
– The 5/2-way solenoid valve, bistable (Ident. code J)
consists of two components, the
"control valve" and the
"power valve".
Each valve has its own housing. The
control valve is situated to the left of the "power
valve" and does not have any working lines
Seal all connections which are not required for the reli-
•
ability of the CPV-SC valve terminal with blanking plugs
Fit the screw connector or the silencers as shown in the fol-
lowing table. Then connect the tubing.
Festo P.BE-CPVSC-EN en 1206f