Vector (Hatch) Fills - Vision Phoenix 1212 S5 User Manual

96 Vision Phoenix 1212 S5 User Manual
The final image is shown below after it was imported and converted to a vector outline. It is ready to cut
or engrave.
5.4.5.2

Vector (Hatch) Fills

When an outline of an object needs to have the interior, or sections of the interior engraved, the Hatch Fill
tool is used. As an example, if a simple circle is drawn in the Vision software, but the user wants to
engrave the entire circle, not just the outline, a hatch fill is used to create the vector fill path for the
engraver to follow. In this section, three applications of a hatch fill will be shown.
© 2018 Vision Engraving & Routing Systems