Installing Additional Drivers - Vision Phoenix 1212 S5 User Manual

122 Vision Phoenix 1212 S5 User Manual
5.5.6

Installing Additional Drivers

If you need to install additional drivers, such as the Phoenix 1212 S5 Vise driver or for another machine,
in the Vision 10 software, select File from the top menu bar, then select Install and click on Cutting
Devices.
The Installation Wizard will begin.
The Driver Installation Wizard window will appear. Select the machine series from the Manufacturer list
on the left side by placing a check mark in the box of the machine you wish to use the driver for, then
select the driver(s) by placing a check mark in the box to the left of the driver(s) you wish to install. Click
on Next to install the driver(s).
© 2018 Vision Engraving & Routing Systems