Part I Introduction - Vision Phoenix 1212 S5 User Manual

Introduction 5
1 Introduction
About This Manual
This manual provides you with information about the Vision Engraving or Routing system. Beginning with
unpacking the machine and continuing through installation, operation and lifetime machine maintenance.
This manual does not teach the user how to become an expert in engraving, computer usage, or
engraving software. Some previous knowledge of engraving terms and the engraving process is beneficial.
For information on the Vision Engraving Software, see the Vision Engraving Software manual.
For more information on your individual computer system, see your computer's user manual or contact
your computer distributor.
To begin, locate the White/Blue Dongle or Silver Dongle or
Blue/Silver USB Stick included with your machine in the
Accessories Box
Important Note:
The Vision software is available in two versions; one with a dongle, and one
that is "dongle-less" and is loaded on to a USB Memory stick.
If your machine was delivered with, or you currently have the white/blue or
orange software dongle, DO NOT LOSE IT!
The Vision software will NOT run without the dongle plugged into the computer.
© 2018 Vision Engraving & Routing Systems