Part Viii Optional Accessories; Vacuum Chip Removal System - Vision Phoenix 1212 S5 User Manual

138 Vision Phoenix 1212 S5 User Manual
8 Optional Accessories
These accessories are available for purchase directly from Vision, or you local distributor, as well as
through www.visionengravers.com. If you have any questions about these accessories, please contact
Vision or your distributor for advice for choosing the best accessories for your applications. Vision can
also help if you have a need for special fixtures, or modifications to our standard accessories. Please call
us for details.
8.1

Vacuum Chip Removal System

The process of engraving or cutting plastics, acrylics, sign foam and wood, produce a significant amount
of debris that can clog the nose cone and/or get trapped between the nose cone and the material, which
will cause engraving/cutting depth inconsistencies as well as potentially scratch the surface of the
material. The vacuum chip removal system is designed to simplify the engraving process and minimize
wear and tear on the engraver. It uses a vacuum nose cone to remove chips created during the engraving
process before they have the chance to create problems. The quiet pump, coupled with the
microfinelayered filters assures that your unwanted chips are whisked away effortlessly. The vacuum
pump canister uses replaceable/reusable filters to assure maximum efficiency and cost-effectiveness.
The system allows prompt removal of chips and dust created in the engraving process, reducing
contamination and overheating in the spindle area. Chip removal also prevents the cutter from skipping
over letters due to stray particles. This vacuum chip removal system is available with or without a Vision
vacuum nose cone.
The Optional Vacuum Chip Removal System
© 2018 Vision Engraving & Routing Systems