Vision Phoenix 1212 S5 User Manual page 72

72 Vision Phoenix 1212 S5 User Manual
As with Example Job 1, the first step is to set the plate size in the Vision software.
Then, we will enter the text using the Frame Text Compose tool as shown below.
With this tool selected, text will automatically be centered and have automatic Kerning. In the below
example, the font was changed to Casual1, with a height of 1.250 inches and a slant of 19 degrees. The
top and center lines are left justified and the bottom is center justified in order to produce a sloping look
© 2018 Vision Engraving & Routing Systems