Direct Connection To Computer - Vision Phoenix 1212 S5 User Manual

32 Vision Phoenix 1212 S5 User Manual
Follow the steps from one of the two sections below to configure the IP address depending on the
connection type above.
3.3.1

Direct Connection to Computer

Direct connection to the computer or direct connection using a network hub or switch.
Once the machine is connected directly to the computer's network port or is connected directly to a
network hub or switch with the black Ethernet cable, power the machine on. The power switch for the
Phoenix 1212 is located on the power supply box for the machine. Once the machine has initialized, the
home screen will appear on the LCD screen.
Select the Settings Screen icon.
© 2018 Vision Engraving & Routing Systems