Table of Contents
Advertisement
Setup Menu
The TLP Pro 1220, 1520, and 1720 series touchpanels can be set up by using the on-screen
setup menu. This section provides information about accessing the Setup menu and the six
sub-menus:
•
•
•
•
•
•
•
Setup Menu
To open the setup menu, press the
figure 3
recessed button, which can be accessed from under the front panel (see
6). Use a small screwdriver to press the button.
The menus open at the
the top of the screen. These open the following screens:
•
•
•
•
•
•
The button for the selected screen is yellow; the buttons for the remaining screens are black.
There is also a red
the menu screens.
In this section, the figures show the screens for the TLP Pro 1220MG. The screens for the other
touchpanels are similar.
Setup Menu
Status Screen
Network Screen
Display Screen
Audio Screen
Input Screen
Advanced Screen
on page 8). In addition, the TLP Pro 1220MG, 1520MG, and 1720MG have a
screen. There are six different buttons in the navigation panel at
Status
Status Screen
(see the following page)
Network Screen
(see the following page)
Display Screen
(see page 16)
Audio Screen
(see page 17)
Input Screen
(see page 17)
Advanced Screen
(see page 19)
button in the top right corner of the screen. Pressing this button closes
Exit
TLP Pro 1220, TLP Pro 1520, and TLP Pro 1720 Series • Setup Menu
button, which is located on the rear panel (see
Menu
figure 2
on page
13
Advertisement
Table of Contents
