Skoda Octavia Workshop Manual page 67

OCTAVIA
Test of vehicle systems
Select function XX
Read measured value block
Enter display group number XXX
Read measured value block 1
780 rpm 85 °C
Edition 11.98
S00.5109.51.20
Fuel Preparation/Fuel Injection
HELP
HELP
→
0,75 V 00000000
Testing coolant temperature sender
Special tools, testers and aids required
Vehicle system tester V.A.G 1552 with cable
V.A.G 1551/3
Test box V.A.G 1598/22
Hand-held multimeter, e.g. V.A.G 1526 A or
multimeter V.A.G 1715
Adapter cable set V.A.G 1594 A
Current flow diagram
Note:
Resistances for coolant temperature sender
-G62- page 24-8.
Test procedure
- Connect vehicle system tester V.A.G 1552
and select engine electronics control unit with
the address word 01. The engine should be
running at idling speed for this step.
(Connecting vehicle system tester and
selecting engine electronics control unit
page 01-2.)
K Readout in display:
- Press keys 0 and 8 for the function „Read
measured value block" and confirm the entry
with the key Q.
K Readout in display:
- Press keys 001 for "Display group number
001" and confirm the entry with the key Q.
K Readout in display, e.g.:
24
------------ ------------