Screen From Network >> Start Reading Input Data - UEi RACKtangle DNR-12-1G Series User Manual

5.2.4.2.1 Interacting
with I/O
Boards
© Copyright 2018
United Electronic Industries, Inc.
DNR-X-1G Series RACKtangle and HalfRACK Systems
Figure 5-18. Screen from Network >> Start Reading Input Data
To read data from an I/O board, select Network >> Start Reading Input Data. The
Value column for any inputs will update, as shown above in the settings panel.
Also in the settings panel, you can add or edit channel names. After editing
names, choose Network >> Store Config to save changes to the board. This is
true for all boards.
Additionally, if you have changed a configuration value, but have not chosen
Network >> Store Config to save them, previous values can be re-read from the
board, using Network >> Reload Config.
October 2018
Chapter 5 82
PowerDNA Explorer
www.ueidaq.com
508.921.4600