Firmware Update Via Serial Port - UEi RACKtangle DNR-12-1G Series User Manual

STEP 6: Do the following to transfer the Motorola firmware image file (refer
\Program Files (x86)\UEI\PowerDNA\Firmware\Firmware_PPC_1G\rom8347_4_x_y.mot
STEP 7: Wait for the upload to complete (it may take a few minutes).
STEP 8: After the process finishes, type go FF800100 in the MTTTY terminal window.
© Copyright 2018
United Electronic Industries, Inc.
DNR-X-1G Series RACKtangle and HalfRACK Systems
Figure 4-12. Firmware Update via Serial Port
to Figure 4-12):
a. In the MTTTY menu bar, select
b. Navigate to your UEI installation, and select the image file:
NOTE: A progress bar will appear in the lower left corner of MTTTY, indicating
progress.
The CPU module will then be updated and running the new firmware.
October 2018
Installation and Configuration
Transfer » Send
File.
Chapter 4 55
www.ueidaq.com
508.921.4600