Table of Contents
Advertisement
4.1.1
Inspect
Package
4.1.2
Install
Software
STEP 1: Open the PowerDNA Software Suite installer as an administrator.
© Copyright 2018
United Electronic Industries, Inc.
DNR-X-1G Series RACKtangle and HalfRACK Systems
Inspect the contents of the shipping package. With a standard DNR-X-1G
system, you should find:
•
A DNR-12 or DNR-6 enclosure, preinstalled with a NIC/CPU
(DNR-CPU-1000/-XX) module, DNR-POWER-DC module, blank filler
panels (if specified), plus your selection of I/O boards. A DNR-12 system
also includes a DNR-BUFFER module (not used with a DNR-6).
•
A DNA-PSU-180 180-watt (for DNR-12-1G product versions) or
a DNA-PSU-100 100-watt (for DNR-6-1G) universal powerline brick
that plugs into an AC outlet and provides 24V DC output. The supply
comes with a power cord for the mains and an adapter cable ending in
a Molex connector for plugging into the DNR-POWER-DC Module.
•
DB-9 serial cable for initial hardware configuration and firmware
downloading.
•
Cat5e Ethernet cable (7 foot).
•
CD-ROM with support software.
This section describes how to load the PowerDNA software suite onto a
Windows- or Linux-based computer (i.e. host PC) and run some initial tests.
The latest PowerDNA or DNR-X-1G support software is online at
www.ueidaq.com/download; a copy is also on the PowerDNA Software Suite
CD.
A. Software Install: Windows
The PowerDNA CD provides one installer that combines the UEI low-level driver
and UEIDAQ Framework.
Be sure to install third-party applications (such as LabVIEW, MATLAB, or Visual
Studio) before installing the PowerDNA Software Suite. The installer
automatically searches for third-party IDE and testing suites, and adds them as
tools to the suites found.
To install the PowerDNA Software Suite, do the following:
You can run the installer from the provided PowerDNA Software Suite CD or
from a downloaded installation from our website.
•
To run the installer from the PowerDNA Software Suite CD, insert the CD into
your CD-ROM drive. Windows should automatically start the PowerDNA
Setup program.
An installer with the UEI logo will open, and then the
PowerDNA Welcome screen should appear.
If this does not happen, run setup.exe from the CD drive:
Start >> Run >> d:\setup.exe >> OK
•
To run from a recently downloaded executable from www.ueidaq.com,
right-click the filename, and run as administrator.
1. A larger power supply is required for some configurations. Refer to
UEI.
October 2018
Chapter 4
Installation and Configuration
www.ueidaq.com
508.921.4600
37
1
Hide quick links:
Advertisement
Table of Contents
