Location Of Fuse For Base Boards Equipped With A Fuse; Dna/Dnr Replacement Fuses; Appendix B - UEi RACKtangle DNR-12-1G Series User Manual

Field Replacement of Fuses on DNA and DNR Boards
Some boards used in UEI DAQ I/O systems require field replacement of fuses when unexpected overloads
occur. Locations of these fuses are shown in Figure B-1 through Figure B-3. Part numbers for the
replacement fuses are listed Table B-1.
Table B-1 DNA/DNR Replacement Fuses
UEI Fuse UEI Part
ID (Board) Rating
F1 5A 925-5125
F2 5A 925-5125
F3 (DC) 5A 925-5125
F3 (1GB) 10A 925-1125
F4 5A 925-5125
© Copyright 2018
United Electronic Industries, Inc.
DNR-X-1G Series RACKtangle and HalfRACK Systems

Appendix B

No. Description
FUSE 5A 125V SLO SMD SILVER T/R
FUSE 5A 125V SLO SMD SILVER T/R
FUSE 5A 125V SLO SMD SILVER T/R
FUSE 10A 125V FAST NAN02 SMD
FUSE 5A 125V SLO SMD SILVER T/R
Figure B-1. Location of Fuse for Base Boards Equipped with a Fuse
October 2018
Mfr.
Littlefuse
Littlefuse
Littlefuse
Littlefuse
Littlefuse
5A 125V SLO SMD SILVER FUSE
UEI P/N 92505125
F1 (5A)
Appendix B 109
Mfr P/N
0454005.MR
0454005.MR
0454005.MR
0451010.MRL
0454005.MR
www.ueidaq.com
508.921.4600