Table of Contents
Advertisement
Chapter 1
1.1
Organization
of This
Manual
© Copyright 2018
United Electronic Industries, Inc.
DNR-X-1G Series RACKtangle and HalfRACK Systems
Introduction
This document describes the features, performance specifications, and
operating functions of the DNR-12-1G Series RACKtangle
Series HalfRACK
data acquisition systems.
RACKtangle and HalfRACK versions are identical except for the size of the
enclosure and the number of IO boards that can be installed. Both are designed
for use with a Gigabit Ethernet 1000 Base-T communication network.
This chapter provides the following information about the DNR-X-1G systems:
•
Organization of This Manual (Section 1.1)
•
Product Versions Described in This Manual (Section 1.2)
This DNR-X-1G User Manual is organized as follows:
•
Chapter 1 – Introduction
This chapter describes the organization of the document and the
conventions used throughout the manual.
•
Chapter 2 – DNR-12-1G Series RACKtangle
This chapter provides an overview of a DNR-12-1G system, features,
accessories, and a list of all items you need for initial operation.
•
Chapter 3 – DNR-6-1G Series HalfRACK
This chapter provides an overview of a DNR-6-1G system, features, and
accessories. It is essentially the same as the DNR-12-1G system except
for enclosure size and number and arrangement of I/O boards.
•
Chapter 4 – Installation and Configuration
This chapter summarizes the recommended procedures for installing,
configuring, starting up, and troubleshooting a DNR-X-1G system.
•
Chapter 5 – PowerDNA Explorer
This chapter provides a general description of the menus and screens of
UEI's GUI-based communication application, PowerDNA Explorer,
when used with a DNR-X-1G system.
•
Chapter 6 – Programming CPU Board-specific Functions
This chapter describes tools and facilities used for programming board-
specific functions.
•
Appendix A – Configuring Additional Ethernet Cards
This appendix describes procedures for installing and configuring
Ethernet cards for use with Windows operating systems.
•
Appendix B – Field Replacement of Fuses
This appendix describes procedures for replacing fuses in the field.
•
Index
This is an alphabetical listing of topics covered in the manual, identified
by page number.
October 2018
Chapter 1
Introduction
and the DNR-6-1G
System
System
www.ueidaq.com
508.921.4600
1
Hide quick links:
Advertisement
Table of Contents
