Physical Dimensions Of Dnr-6 Enclosure - UEi RACKtangle DNR-12-1G Series User Manual

5.50 in.
(side view)
© Copyright 2018
United Electronic Industries, Inc.
DNR-X-1G Series RACKtangle and HalfRACK Systems
DNR-6-1G: Except for the width, the DNR-6 enclosure used in a DNR-6-1G
system is compatible with Specification EIA-310-C for 19" Rack Mounting
Equipment and is designed to occupy 3U units of vertical space (where 1U is
1.75"). The physical dimensions of the DNR-6 enclosure are shown below in
Figure 4-14.
Note: For wall mounting, align flanges flush with rear of enclosure.
For rack mounting, UEI recommends using a shelf with
DNR-6-1G systems.
Figure 4-14. Physical Dimensions of DNR-6 Enclosure
October 2018
Installation and Configuration
11.31 in.
10.50 in.
(front view)
Chapter 4 57
www.ueidaq.com
508.921.4600