List Of Functions And Associated Boards - UEi RACKtangle DNR-12-1G Series User Manual

© Copyright 2018
United Electronic Industries, Inc.
DNR-X-1G Series RACKtangle and HalfRACK Systems
DQCMD_IOCTL
This command is used to retrieve data from the board. When a port is in
diagnostic mode, it returns current data but cannot reprogram the channel list.
The channel list is used to inform the handler the ID of the channel from which
data should be retrieved.
The following subset of functions, which rely on the DQCMD_IOCTL command
for transport, are supported:
Table 4-2 List of Functions and Associated Boards
Function
DqAdv201Read
DqAdv205Read
DqAdv207Read
DqAdv225Read
DqAdv3xxWrite
DqAdv40xRead
DqAdv403Read
DqAdv416GetAll
DqAdv432GetAll
DqAdv448Read
DqAdv448ReadAdc
DqAdv501GetStatistics
DqAdv566GetStatistics
DqAdv601Read
DqAdv604Read
October 2018
Installation and Configuration
Associated Board Type(s)
AI-201 and AI-202
AI-205
AI-207
AI-225
AI-302/308 and AI-332
DIO-401/405/404/406
DIO-403
DIO-416 -- Voltage, current, and circuit
breaker state monitoring
DIO-432 -- Voltage, current, and circuit
breaker state monitoring
DIO-448
DIO-448 -- Voltage monitoring
SL-501and SL-508 -- Received/error counters
ARINC-429-566 -- Received/error counters
CT-601 -- Counters, states of input lines
QUAD-604 -- Positions, states of input lines
Chapter 4 64
www.ueidaq.com
508.921.4600