Table of Contents
Advertisement
5.2
Overview of
the Main
Window
Menu Bar
Toolbar
Device Tree
Settings Panel
5.2.1
Menu Bar
5.2.1.1
File Menu
5.2.1.1.1 Setting
Timeouts
© Copyright 2018
United Electronic Industries, Inc.
DNR-X-1G Series RACKtangle and HalfRACK Systems
The Main Window of the PowerDNA Explorer is shown in Figure 5-4 and
consists of four primary sections:
•
The Menu Bar (described in Section 5.2.1)
•
The Toolbar (described in Section 5.2.2)
•
The Device Tree (described in Section 5.2.3)
•
The Settings Panel (described in Section 5.2.4).
Figure 5-4. PowerDNA Explorer Main Window
When PowerDNA Explorer is first launched, the Main window has several
buttons grayed out and shows only the Host PC in the Device Tree, as shown in
Figure 5-4. To access systems in your network, you must first scan the network
(refer to Section 5.1).
The following subsections describe menus and menu items contained in the
Menu Bar.
This section describes items under the File Menu.
The File >> Preferences selection opens the preferences dialog.
The preferences dialog allows you to specify timeout intervals.
Figure 5-5. PowerDNA Explorer Timeout Preferences
PowerDNA Command Timeout sets the length of time PowerDNA Explorer will
wait for response from a CPU/NIC Core Module before giving up with an error. It
defaults to 100 milliseconds.
Firmware Update Timeout specifies the length of time PowerDNA Explorer will
wait when updating firmware via Network >> Update Firmware... The firmware
timeout defaults to 120 seconds. File >> Exit exits the application. If there are
unsaved device settings changes, you are prompted for confirmation.
October 2018
Chapter 5
72
PowerDNA Explorer
www.ueidaq.com
508.921.4600
Hide quick links:
Advertisement
Table of Contents
