Tcp/Ip Properties - UEi RACKtangle DNR-12-1G Series User Manual

© Copyright 2018
United Electronic Industries, Inc.
DNR-X-1G Series RACKtangle and HalfRACK Systems
The following is an example of setting the IP address, subnet mask (netmask),
and default gateway.
NOTE: More information about changing the IP address and other network
settings is provided in "IP Address Overview & Update Procedures" on
page 41.
In the following example, let's assume that you want to connect a DNR-12/6 to
the dedicated network (secondary NIC adapter in the host PC).
Let's also assume that host IP address on this dedicated network is:
IP address: 192.168.100.28
Network mask: 255.255.255.0
Gateway: ignored
DNS: ignored
Figure 6-1. TCP/IP Properties
Set DNR-12/6 system address to any address in the range of 192.168.100.1
through 192.168.100.254 excluding 192.168.100.28 – the host IP address.
For example, type:
DQ> set ip 192.168.100.2
Then:
DQ> store
This sequence of commands stores a new IP address in the flash parameter
sector. Then, you have to reset the DNR-12/6 system.
October 2018
Programming CPU Board-specific Functions
Chapter 6 98
www.ueidaq.com
508.921.4600