Password Dialog Box; Firmware Update Progress Dialog Box - UEi RACKtangle DNR-12-1G Series User Manual

STEP 9: If asked, enter the password to continue. UEI cube and RACK systems come
STEP 10: Wait for the progress dialog to complete. The system will then be updated and
© Copyright 2018
United Electronic Industries, Inc.
DNR-X-1G Series RACKtangle and HalfRACK Systems
with the default password set to powerdna.
powerdna
Figure 4-10. Password Dialog Box
running the new firmware.
Figure 4-11. Firmware Update Progress Dialog Box
Each system is updated in three steps. First, the firmware is transferred to the
system. Second, the firmware is written to the flash memory. During this step,
the R/W light on the front of the chassis is lit, in addition to the PG light. Third,
the system is reset. During this step, the ATT, COM, and PG lights are lit, and the
R/W light will turn on and off periodically. When the system is finished resetting,
only the PG light is lit.
October 2018
Chapter 4
Installation and Configuration
www.ueidaq.com
508.921.4600
53