Perform Autotest; Open Job Folder Of Autotest - IDEAL Networks LanTEK III Manual

5.10

Perform Autotest

Autotest is performed after all preferences have been carried out.
1. Disconnect the cable line to be tested from all network components.
2. Using suitable patch cords, connect the Display handset (DH) to one end of the
cable line (link), and the Remote handset (RH) to the opposite end of the cable
line (link).
3. Start by pressing Autotest.
5.11

Open Job Folder of Autotest

The internal memory of LanTEK
CAT-6 Autotest results with graphs, which can later be loaded again via File . The Autotest
results can be saved immediately after the test.
•
The complete set of test results is saved in a file.
• The test results are automatically saved if Autosave option is enabled.
• Completed tests are automatically assigned a name. If another name is desired, the
test can be renamed via option Rename.
LanTEK III
User Manual
III Cable Tester can hold a maximum of 1700 individual TIA
®
161809 Iss 2
Page52