IDEAL Networks LanTEK III Manual page 4

Disclaimer
IDEAL INDUSTRIES, LTD. does not assume any liability for death, injury or damage to
equipment or property resulting from improper use of the battery packs.
IDEAL INDUSTRIES, LTD. will not be liable for consequential damages that may result from
tampering with the battery packs or charger or their use thereafter.
Subject to technical changes.
Environmental Protection
If you have any questions concerning these precautions, the operating instructions, or any
other concerns about the safe use and disposal of the battery packs used in LanTEK®III,
please contact a representative of IDEAL INDUSTRIES, LTD. For contact information, please
refer to Chapter Customer Service.
Using the LanTEK®III Cable Certifier
All cable parameter default settings programmed in the LanTEK®III Cable Certifier are based
on generic standards, proposed industry recommendations for cables and network links,
the latest technical information available from International LAN cabling standards
committees, the LAN industry, and IDEAL INDUSTRIES' own experience and testing.
Before performing any measurements, IDEAL INDUSTRIES, LTD. recommends to request
detailed information from contractor or project manager on the standards to be used for
measuring, to ensure that relevant parameters are complied with.
Information on the use of this Instruction Manual
The following symbols used in this manual indicate that the user should exercise particular
caution in order to prevent personal injury or damage to the LanTEK®II Cable Certifier or the
system under test.
WARNING!
This symbol indicates potentially lethal voltages. The life and/or health of the person
performing the activity or anybody in the vicinity is at risk.
CAUTION!
This symbol indicates that the relative activity could possibly harm the environment or
damage technical equipment.
NOTE:
Here you will find general notes, additional information, or support.
Typographical Conventions
Boldface Refers to a button on LanTEK®III Cable Certifier.
•
• Italics Refers to a menu option in this Operating Manual.
• Quotation marks " " Identifies a "Screen Message".
LanTEK III
User Manual
161809 Iss 2
Page3