Default Cable Id - IDEAL Networks LanTEK III Manual

12. Make corrections to entries by using the soft keys
position),
(insert alphanumeric characters at cursor position / overwrite highlighted entry).
13. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
5.3.2

Default Cable ID

Simple cable ID was not selected in Autotest Pref.
Use Arrow keys to navigate in "Cable ID" view to option Set... and press Enter.
1.
Simple Cable ID (1 cable name)
2. Use Alphanumeric Keys to enter a Cable Name for the test portion.
3. Use Alphanumeric Keys to reset the Current Value of the test meter, or enter an
arbitrary value.
4. Use Alphanumeric Keys to enter an arbitrary value for Start and End. Meter is
reset after reaching final value.
5. Make corrections to entries by using the soft keys
position),
(insert alphanumeric characters at cursor position / overwrite highlighted entry).
6. Use symbol
Auto Increment of a character.
7. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
LanTEK III
User Manual
(delete characters to the left of cursor),
(delete characters to the left of cursor),
to lock a position into entered value. Use symbol
Fig. 32 Single Cable ID
(delete at cursor
/
(delete at cursor
/
to enable
161809 Iss 2
Page33