6. Connect a cable of known length.
7. Use Arrow Keys and Number Keys to enter known cable length.
8. For automatic calculation of a new NVP, press
NVP, the display returns to the NVP main screen.
NOTE:
This concerns a channel measurement. When entering the cable length, the length of both
patch cords must be considered.
5.8
Coaxial Cable Standards
The LanTEK
III Cable Tester supports the following coaxial cable standards:
®
CATV standards
RG59 31 or 92 m
(3-fold or 4-fold shield)
RG6 31 or 92 m
(3-fold or 4-fold shield)
1.
Open "Cable Type" on start screen.
2. Use Arrow Keys to navigate to option
3. Use Arrow Keys to navigate to desired cable type and confirm with Enter.
LanTEK III
User Manual
Ethernet standards
10Base 2
10Base 5
Ethernet and confirm with
Fig. 56 Ethernet
Fig. 57 Cable Type
. After calculation of new
Other cable types
IBM Coax
TWINAXIAL
ARCNET
Enter.
161809 Iss 2
Page47