IDEAL Networks LanTEK III Manual page 50

mark the patch cords accordingly.
2. Connect Display handset (DH) and Remote handset (RH) with patch cord for
Remote handset (RH), as shown on the display. Remember which connection
of the patch cord is connected to the Remote handset (RH).
3. Use soft key
calibration, and a progress bar shows the status.
4. Connect Display handset (DH) and Remote handset (RH) with patch cord for
Display handset (DH), as shown on the display. Remember which connection of
the patch cord is connected to the Display handset (DH).
5. Use soft key
indicates calibration, and a progress bar shows the status.
6. Perform the same patch cord connections to Display handset (DH) and Remote
handset (RH) as during the previous test steps.
LanTEK III
User Manual
Fig. 59 Patch Cord (RH)
to initiate calibration. The Remote handset (RH) indicates
Fig. 60 Patch Cord (DH)
to continue calibration. The Remote handset (RH)
161809 Iss 2
Page49