Graph Formats, Layouts And Controls - IDEAL Networks LanTEK III Manual

7. Use Arrow Keys to navigate to desired test result and press Enter to display
graph.
When opening graph, cursor is always in worst case margin. In this example, cursor is
positioned on horizontal axis at 186 MHz.
8. Press Escape to return to previous screen.
5.12.1

Graph Formats, Layouts and Controls

Graphs make it easier to recognize the relation between two network parameters, the
actually measured values and the pre-programmed limits.
The horizontal axis indicates the frequency values and the vertical axis the measured values
in dB. The limits are drawn as solid line.
Table view
The margins indicated at lower right in table view provide information on worst case
distance between the actual measuring values and the specified limits, as shown by the
cursor position in the graph on the right.
LanTEK III
User Manual
Fig. 68 NEXT Graph
10
9
8
Fig. 69 Table View and Graph View
Graph view
7
1
2
3
4
5
6
161809 Iss 2
Page56